esptool v0.4.9 - (c) 2014 Ch. Klippel <ck@atelier-klippel.de>
	setting board to ck
	setting baudrate from 115200 to 115200
	setting port from COM1 to COM4
	setting address from 0x00000000 to 0x00000000
	espcomm_upload_file
	espcomm_upload_mem
	setting serial port timeouts to 1000 ms
opening bootloader
resetting board
trying to connect
	flush start
	setting serial port timeouts to 1 ms
	setting serial port timeouts to 1000 ms
	flush complete
	espcomm_send_command: sending command header
	espcomm_send_command: sending command payload
	read 0, requested 1
trying to connect
	flush start
	setting serial port timeouts to 1 ms
	setting serial port timeouts to 1000 ms
	flush complete
	espcomm_send_command: sending command header
	espcomm_send_command: sending command payload
	espcomm_send_command: receiving 2 bytes of data
	espcomm_send_command: receiving 2 bytes of data
	espcomm_send_command: receiving 2 bytes of data
	espcomm_send_command: receiving 2 bytes of data
	espcomm_send_command: receiving 2 bytes of data
	espcomm_send_command: receiving 2 bytes of data
	espcomm_send_command: receiving 2 bytes of data
	espcomm_send_command: receiving 2 bytes of data
Uploading 226352 bytes from C:\Users\Tom2\AppData\Local\Temp\arduino_build_826367/Blink.ino.bin to flash at 0x00000000
	erasing flash
	size: 037430 address: 000000
	first_sector_index: 0
	total_sector_count: 56
	head_sector_count: 16
	adjusted_sector_count: 40
	erase_size: 028000
	espcomm_send_command: sending command header
	espcomm_send_command: sending command payload
	setting serial port timeouts to 15000 ms
	setting serial port timeouts to 1000 ms
	espcomm_send_command: receiving 2 bytes of data
	writing flash
................................................................................ [ 36% ]
................................................................................ [ 72% ]
..............................................................                   [ 100% ]
starting app without reboot
	espcomm_send_command: sending command header
	espcomm_send_command: sending command payload
	espcomm_send_command: receiving 2 bytes of data
closing bootloader
	flush start
	setting serial port timeouts to 1 ms
	setting serial port timeouts to 1000 ms
	flush complete